HOW TO PAINT YOUR GARAGE FLOOR LIKE A PROFESSIONAL
INDOPOX,INDUSTRIAL GRADE EPOXY FLOOR
EPOXY
APPLICATION METHOD
PREPARATION:
- Concrete needs at least 28 Days to be fully cured.
- Etch the floor or Grind it.
- To acid wash, Dilute one third Hydrochloridric acid with water,
- Add Acid to the water tank,
- Pour on floor, Use broom to spread it out,
- Wash it by high pressure washer after 5 Min.
- Apply PRIMIT when the floor is dried, Use 12 mm nap roller.
- 4 litre PRIMIT KIT IS ENOUGH FOR NORMAL
DOUBLE GARAGE & NORMAL CONCRETE
- Follow the ratio, Mix thoroughly by Mixer, Pot life is two hours,
- Cut edges and corners first.
- EPOXY PRIMER, Needs to be applied on bare concrete as a thin layer to penetrate and bite the concrete.
- It needs 8 hours to dry.
- Inspect the floor, Needs to be fully dried.
- Patch Cavities and Cracks by Builderpox & Filler blade, Needs 3 hours to dry.
- ONE 16 Litre KIT,INDOPOX COVERS 80 Sqm ONE COAT.
- Make it half and apply two coats.
- Apply First Coat by roller, Use 12 mm nap roller
- Follow the ratio, Mix Part A & Part B thoroughly by Mixer or Drill Move paddle mixer vertically,
- Pot life is 30 Minutes, Make sure everything is ready to apply.
- Tape all skirting and doors to protect from Epoxy Splash.
- Mix Small Batch, Use Scale, Mix by Weigh not Volume.
- Start by 5 Kg Part A & 1 Kg Part B
- Cut edges and corners first by baby roll or brush.
- Pour on Floor, Use Squeege to spread it out, apply by 270 mm roller, Check not to leave any lines or spot behind.
- Needs 8 hours to dry and walk on.
- Interval is between 8 to 72 hours.
- Apply Second Coat by roller, Use 12 mm nap roller
- Follow the ratio, Mix thoroughly by Mixer, Pot life 30 Min.
- Mix Small Batch, Use Scale, Mix by Weigh not Volume.
- Cut edges and corners first.
- Pour on Floor, Use Squeege to spread it out, apply by 270 mm roller, Check not to leave any line behind. Needs 24 hours to walk on.
- Needs 7 days to be fully cured
- Do not wet the area at least for seven days depends on the weather condition.
Enjoy Your Nice & Gloss Floor
Disclaimer: This application method is based on our best experience and knowledge as it is beyond the control of Chemstuk group, Use it as a guide only.